TV-specific: the wall-mounted TV drop is the most visible cable run in most homes, and it has a specific best fix.
Best Cable Management for TV Setups (2026)
Hide TV cables the right way: raceways for the wall drop, boxes for the console power, and sleeving for the nest behind the stand.
Our top picks at a glance
Best for the TV wall drop
Delamu Cable Raceway Kit (J Channel)Routing TV, monitor, and desk cables along walls and desk edges in straight, clean lines.
Best for console power
DMoose Cable Management Box (Large)Hiding a power strip and its chargers under or beside a desk in one lidded box.
Best behind the stand
Alex Tech Cord Protector Wire Loom (25 ft)Bundling loose cable runs behind desks, TVs, and entertainment centers into one tidy tube.
For a TV setup, run a Delamu J channel painted to match the wall from the TV down to the console: that one run is 80 percent of the visible problem. Hide the power strip in a DMoose box behind the stand, and bundle the HDMI and audio tangle in Alex Tech sleeving.
The picks, ranked
| Pick | Total length | Profile | Material | Buy |
|---|---|---|---|---|
Best for the TV wall dropDelamu Cable Raceway Kit (J Channel) | 157 in across 10 channels (15.7 in each) | 0.98 x 0.59 in (W x H) | Paintable PVC | Check price |
Best for console powerDMoose Cable Management Box (Large) | — | — | Heat-resistant ABS plastic | Check price |
Best behind the standAlex Tech Cord Protector Wire Loom (25 ft) | — | — | Polyethylene (PET) | Check price |
Best for the TV wall drop
Delamu Cable Raceway Kit (J Channel)
Paintable channels that make wall cables vanish.

Strengths
- 157 inches of channel across 10 snap-together pieces
- Paintable PVC blends into any wall color
- Adhesive tape plus screws included for both mounting styles
Limitations
- Straight runs only; corners need planning or elbow pieces
- Adhesive can damage paint on removal in rentals
- Narrow 0.98 x 0.59 in profile fits few thick cables per channel
What owners report
Commonly praised
- Hides under-desk cables cleanly
- Quick peel-and-stick install
- Good value multi-pack
Common complaints
- Strong adhesive can pull paint when repositioned
- Channels fill up fast with thick power cables
- Plan the layout first, because removal is messy
Recurring themes from owner reviews on retailers and forums, summarised by our editors. Updated October 2026.
| Total length | 157 in across 10 channels (15.7 in each) |
|---|---|
| Profile | 0.98 x 0.59 in (W x H) |
| Material | Paintable PVC |
| Mounting | Adhesive tape and screws included |
| Access | Snap-open lids for adding cables |
Best for: Routing TV, monitor, and desk cables along walls and desk edges in straight, clean lines.
Skip if: You rent and cannot use adhesive or screws, or your cables change weekly and need constant access.
Best for console power
DMoose Cable Management Box (Large)
Swallow the whole power strip, lid and all.

Strengths
- Large interior fits standard power strips with chargers attached
- Lidded design hides everything while venting heat
- Side slots route cables in and out cleanly
Limitations
- Very large power strips may not fit; measure first
- Lid must come off to reach plugs, which is mildly annoying
- Plastic build, not furniture-grade
What owners report
Commonly praised
- Completely hides large power strips
- Fire-resistant material with ventilation
- Several finishes to match decor
Common complaints
- Plastic feels thin
- Lid fit can be loose on some units
- Large logo on the lid
Recurring themes from owner reviews on retailers and forums, summarised by our editors. Updated October 2026.
| Dimensions | 15.7 x 6.1 x 5.3 in (40 x 15.5 x 13.5 cm) |
|---|---|
| Capacity | Fits standard 6-12 outlet power strips |
| Material | Heat-resistant ABS plastic |
| Cable entry | Slots on both ends plus lid gap |
| Safety | Vented lid for heat dissipation |
Best for: Hiding a power strip and its chargers under or beside a desk in one lidded box.
Skip if: Your power strip is oversized or you need frequent access to individual plugs.
Best behind the stand
Alex Tech Cord Protector Wire Loom (25 ft)
25 feet of split sleeving that bundles anything.

Strengths
- 25 feet of 1/2 in split sleeving covers long runs
- Split design lets cables enter and exit anywhere along the run
- Polyethylene construction resists fraying and pets
Limitations
- Bundles cables visibly rather than hiding them
- 1/2 in diameter limits how many thick cables fit
- Cut ends can fray without heat-sealing
What owners report
Commonly praised
- Easy split design for adding cords later
- Tidies cables behind desks and TVs
- Helps deter pets from chewing cords
Common complaints
- Split seam can gap open on tight bends
- Thick bundles need a larger size than expected
- Looks utilitarian in visible spots
Recurring themes from owner reviews on retailers and forums, summarised by our editors. Updated October 2026.
| Length | 25 ft (7.6 m) |
|---|---|
| Diameter | 1/2 in (13 mm) split sleeving |
| Material | Polyethylene (PET) |
| Included | Cable ties for securing ends |
| Temperature range | -103F to 257F per spec sheet |
Best for: Bundling loose cable runs behind desks, TVs, and entertainment centers into one tidy tube.
Skip if: You want cables fully hidden rather than merely bundled; pair with a raceway instead.
Questions, answered
Should I run TV cables inside the wall instead?
In-wall rated cable kits look best but require cutting drywall and code-compliant cable. A paintable raceway gets you 90 percent of the look with 10 percent of the effort and no drywall repair.
How do I hide cables for a wall-mounted TV with no console below?
Run a raceway channel straight down to the outlet, or to a small floating shelf holding your streamer. The channel is the clean solution when there is no furniture to hide behind.
Can a soundbar cable go in the same raceway as power?
Yes for low-voltage cables like HDMI and optical alongside the TV power cord in a raceway. Keep high-current appliance cords on separate runs as a best practice.